How to dismantle a sofa recliner

How to dismantle a sofa recliner

Removing A sofa recliner Can seem like A daunting task, But it Doesn’t Have to Be. With the right tools and knowledge, Anyone Can dismantle a sofa recliner safely And Easily. In this article, We will discuss the necessary steps to properly Disassemble your couch to make moving or transporting easier. We will provide Detailed instructions with illustrations So that even those unfamiliar with furniture repair can succeed.

1 . Using a Professional Dismantling Service

Using a Professional Dismantling Service

Dismantling A chaise lounge May seem like An easy task. But it can quickly become overwhelming If you don’t Have the right equipment or experience. This is why using A professional Demolition service Is often the best solution. These services specialize in disassembling furniture And appliances, Ensuring. That they Are properly disassembled without Any Damage

When using A professional demolition service, You can Rest assured. That your sofa recliner will Be safely And efficiently disassembled. The process usually Involves carefully removing All the pieces. And involves keeping in protective packaging to prevent Any scratches or dents. Once everything is Disassembled, professionals will transport Each piece to its New location or dispose of it responsibly.

Using A professional demolition service Can save You time, Money And stress.

2. UN-Bolt and Pull Off the Bottom Section

UN-Bolt and Pull Off the Bottom Section

If you are planning to dismantle a chaise lounge. One of the First steps is to unscrew The Bolts And pull out the bottom. This process is relatively simple but requires some care and attention to detail to avoid damaging any part of the chair.

The First step is to locate the bolts that Hold the lower part in place. They Are usually located on Either side of the chair, Where it connects to the Backrest. Use A socket wrench or pliers to loosen these Bolts. So that They don’t Open or damage the surrounding area.

Once all the bolts are removed, Carefully lift off the bottom of the sofa Recliner. This may require some effort Depending on How tightly it was secured in place.

3. Tools and Materials Needed

Tools and Materials Needed

If You Have An old chaise lounge. Whatever Needs to Be taken apart, It’s important to make sure you Have the right tools And materials Before Starting. Dismantling A chaise lounge can seem like A daunting task. But with The right supplies And some patience, It Can Be done quickly And easily.

To get started, You’ll Need A set of screwdrivers of various sizes. Dismantle A sofa recliner Because different types of screws Are commonly used in furniture assembly, Including Flathead And Phillips Head screw. You should Have pliers on Hand to remove Any stubborn Bolts or nuts. Additionally, Can Hold the chair together. An adjustable wrench will come in Handy for tightening or loosening Any such hardware.

Learn how to easily clean your sofa pillows and keep them looking like new with these simple steps. Get the perfect clean every time!

4. Unscrew the seats from the bottom rail (optional)

Unscrew the seats from the bottom rail (optional)

destroy A sofa recliner can Be An intimidating task. But it can Be easily Done with the right tools And knowledge. One of the Steps involved is to screw the seats off the bottom rail. Although this is An optional step, It Can make taking your sofa apart much easier.

To Begin, Locate the screws that attach the seats to the Bottom rail Of your recliner. These screws Are usually located At the front or  Back of Each seat. Carefully remove them using A screwdriver or drill, Making sure Not to tear Any screws in the process.

Once All The screws Are removed, Lift each seat off its rails And set them aside. This will Allow you Better access to other parts of your recliner that may need to Be dismantled.

5. Disconnect Your Power Furniture

Disconnect Your Power Furniture

Disconnecting your power furniture, Such as A sofa recliner, Can seem like a daunting task. But with the right tools and knowledge, Dismantle A sofa recliner can Be done easily And safely. The first step is to unplug the power cord from the wall outlet to Avoid Any electrical hazards. It is also important to remove Any loose items or cushions from the furniture Before starting.

Next, Locate the release latch on your recliner. It is usually located under the chair or between the seat And the armrest. Once you find it, Use A Flathead screwdriver or similar tool to press on it while pulling on the footrest. This will release Any locking mechanisms And allow you to fully extend the footrest.

If you Need to further disassemble your chaise lounge for transport purposes. Then you need to remove Any screws or bolts holding it in place.

6. Take off the top half of your La-Z-Boy furniture

Take off the top half of your La-Z-Boy furniture

 Chair recliners are the ultimate comfortable furniture that can help you unwind after a long day. Over time, they may begin to lose their appeal or become outdated. Whether you want to give your La-Z-Boy chaise lounge A facelift or replace it completely. But breaking it down is An essential first step.

Dismantling A sofa recliner May seem like A daunting task At first, But it’s not As complicated As it sounds. First, Remove all the cushions from your La-Z-Boy’s seat And back. This will expose the frame of your chair recliner And make it easier to work on.

Next is removing the Bolts holding the top half of your La-Z-Boy furniture.

7. Remove all nuts and bolts from the base bar

Remove all nuts and bolts from the base bar

Dismantling A sofa recliner can Be A daunting task, Especially If you Do not know where to start. However, With the right tools And knowledge, It can Be an easy process. One of the first steps is to remove All nuts And bolts from the Base bar. This will make it easier to take apart other parts of the chair.

To Begin this process, You will Need A socket wrench or pliers. Locate all The nuts And bolts that secure the base Bar to the frame of your chair recliner. Use your tool to loosen Each nut And Bolt until they come off completely. Make sure to keep them in A safe place As you will need them when reassembling your furniture.

After removing All nuts And bolts from the Base Bar, Carefully detach it from its position on your chaise lounge frame.

8. Unhook the Levers on Both Sides

Unhook the Levers on Both Sides

Dismantling A  chair recliner can seem like A daunting task, Especially if you Have never done it Before. However, With the right tools And knowledge, It can Be A straightforward process. One of the First things to Do is to unhook the Levers on both sides of the chair. This will allow you to easily access other parts of the sofa And dismantle them.

To unhook the levers, Start By finding them on either side of the chair. They Are usually located near where your Hands would naturally fall when sitting in the Chair. Once you Have located them, Simply lift or push them up And away from their locked positions. You may need to use some force depending on How tightly they Are secured.

9. Unplug Your Power Furniture From Your Wall Outlet

Unplug Your Power Furniture From Your Wall Outlet

Unplugging your power furniture from the Wall outlet is Essential for safety. If you Have A sofa recliner that needs to Be dismantled. But you can follow few steps to do it yourself. Before starting the process, Make sure you Have All the necessary tools And equipment Ready.

First, Remove Any cushions or covers from the sofa Recliner to expose the frame. Locate And unscrew any screws that Hold the Back of the chair. Gently lift the Backrest And set it aside. Next, Locate and unscrew Any screws on Both arms of your  chair recliner

Once both arms are removed, Look for Any screws that are holding your seat cushion or Base in place. Remove these screws carefully so as not to damage Any electrical wires or components attached to them.

10. Lift the Back of the Frame From the Brackets

Lift the Back of the Frame From the Brackets

Are you wondering How to dismantle A sofa recliner? One of the First steps is to lift the back of the frame from the Bracket. It May seem daunting, But with A few simple tools And some patience, You can get it done.

Start By locating The Brackets on both sides of the chair. They Are usually located at the Bottom of the frame And Hold the backspace. Use A screwdriver or wrench to loosen any Bolts or screws holding them in place.

With both brackets detached, You Can now lift up the back of your chaise lounge to remove it completely. Don’t forget to Have someone else help you if needed – these frames can Be heavy!

11. Putting the base bar back together

Putting the base bar back together

Dismantling A sofa recliner can seem overwhelming, Especially if you’re not familiar with the process. However, Detaching the base Bar can make it easier to transport or clean without damaging your furniture. Here are some steps on How to dismantle A  chair recliner and put the Base bar back together.

First, Remove Any cushions or fabric covers from the chair. This will give you Better access to the screws And bolts that Hold the base bar in place. Next, locate and remove all these fasteners using A suitable tool such as A wrench or screwdriver. Be sure to keep track of Each piece as you take them off so you don’t lose Anything Important.

Once all fasteners are removed, Carefully lift the Base bar From under your sofa frame.

12. Remove the back and seat cushions

Remove the back and seat cushions

Dismantling A chaise lounge Can seem like A daunting task. One of the first things you need to do is Remove the Back and seat cushions. This will give you better access to the inner workings of the chair mechanism, Making it easier to disassemble.

To begin, Locate the zippers or fasteners that Hold the cushions in place. You may need to use A Flathead screwdriver or pliers to Gently pry them open. Once they are loose, Carefully lift each cushion one By one. Be careful not to damage Any fabric or padding As you go.

With the cushions removed, You should Now Have A clear view of Any bolts or screws holding the frame together. Note their location And size so you can easily assemble everything later.

13. Don’t let a large recliner get in your way

Don’t let a large recliner get in your way

Are you moving into A new Home And worried about How to deal with that Heavy recliner sofa? Don’t Let that get in your way, Because Breaking A sofa recliner is Easier than you might think. In this article, We’ll walk you through the steps to dismantle A recliner sofa so You Can move it without Any Hassle.

First, Remove All the cushions from the chair And set them aside. Then flip over the chair. And Locate the bolts or screws that Hold the Backrest to the seat section. Use A screwdriver or wrench to unscrew them. After removing these screws or bolts, Lift the backrest from the seat unit. And separate Any wires connecting Both parts if Any.

Next, Find where each armrest connects to the corresponding side of the seat section.

14. Document the disassembly

Document the disassembly

Dismantling furniture can Be A daunting task. Especially when it comes to Complex pieces like sofa recliners. However, With some patience And the Right tools, you Can successfully disassemble Your chaise lounge for Cleaning or moving. Before diving into the Disassembly process. Documenting each step is essential to ensure smooth reintegration.

The first step in dismantling your chair recliner is to remove Any cushions or covers that May Be in the Way. And use A screwdriver or wrench to loosen them. Be sure to keep track of Each screw And where they came from By taking pictures or labeling as You go.

15. Separate the parts accordingly

Separate the parts accordingly

Dismantling A sofa recliner Can seem like A daunting task. But It’s actually pretty Easy If You know what You’re doing. The first step is to locate the screws or bolts that hold the chair mechanism in place. Once you Have removed the screws, Gently lift the chair mechanism from its Housing. and set it aside. Next, Remove any cushions or upholstery covering any other part of the sofa.

The next step is to separate All the individual parts According to their functions. For example, separate All metal springs from Each other. And place in one pile, While separating the wooden frame pieces into another pile.

16. Dismantle the rest of the sofa recliner

Dismantle the rest of the sofa recliner

destroy A sofa recliner might seem like A daunting task, But it’s actually quite simple if You know what you’re Doing. The first step is to gather All the necessary tools, Including pliers, Screwdrivers And A wrench. Once you Have these items on hand, Begin By removing Any cushions or pillows from the chair

Next, Locate the screws that Hold the frame of the chair in place. These Are typically found underneath the seat cushion or along the sides of the chair.

With all screws removed, Gently lift up on the frame of the chair to Detach it from its Base. Take care not to damage any mechanisms or wiring as You do this. And there you Have it – destroy A chaise lounge made easy!

17. Tilt the sofa recliner to help you access its rear

Tilt the sofa recliner to help you access its rear

Are you struggling to access the back of your sofa recliner? Tilting it may Be the solution you Need. By tilting your Sofa recliner, You can easily access its back And dismantle it easily. Here’s How to do it:

First, Make sure your chair recliner isn’t too heavy to tilt. If it’s too heavy, Ask A friend or family member for help. Next, check if there are any obstructions in front of the sofa that might prevent it from moving while tilting. Clear them if necessary.

Next, Stand Behind the sofa And Place Your Hands on the back of it. Slowly tilt the couch toward You while firmly gripping both sides of the backrest. Be careful not to lose control as you tilt.

Once tilted, gently lower the couch onto its back while holding firmly on both sides of the frame.

18. For the seat or seats, you only need to lift them outward

For the seat or seats, you only need to lift them outward

Dismantling a recliner can be a daunting task. But with the right tools And knowledge, it can Be Easily accomplished. If you want to Move your sofa or replace some part of it. But you need to know How to break it properly without damaging its components. In this article, We will guide you step By step on How to disassemble A sofa.

First, Before starting the breaking process, Make sure you Have all the necessary tools like pliers And screwdrivers on Hand. For most models, Only the seats need to Be lifted outwards for Easy access to their screws And Bolts. Once you locate them, Dry them off using your pliers or screwdriver.

19. Detach the center console accordingly

Detach the center console accordingly

destroy

 A sofa recliner can Be A daunting task, Especially if you don’t Have the right tools And knowledge. However, With patience And attention to detail, Anyone Can Learn How to Dismantle A Chaise lounge. One of the first steps is detaching the center console accordingly. This step is crucial As it allows You to access other parts of the chair without Damaging them.

To detach the center console, Start By removing Any screws or Bolts that Hold it in place. You May Need A screwdriver or wrench for this step. Next, Disconnect any wires or cables that connect to the center console.

Conclusion

In conclusion, Breaking A dismantle A sofa recliner is not as difficult As it may seem. With the right tools And the right steps, You Can easily disassemble your chaise lounge. And Can reassemble. Make sure to Label each piece of the sofa carefully so You know where it goes when putting it together. Additionally, All bolts are properly tightened. And take your time to make sure all the pieces are secure Before you use the chair again.

Scroll to Top